Description

Everedge Classic Lawn Edging is an easy to install maintenance free permanent resolution to the age-old headache of maintaining neat edges for your lawn driveways path edging flower and vegetable beds. It can also be used in a variety of soil conditions. Manufactured from galvanised steel with a heavy plastic coating this edging will not rust and is guaranteed for 10-15 years.Very easy to install as individual strips simply slot together and can be fixed into the ground with any regular mallet.Dimensions: 1m x 10cm highHeight of spikes: 9.5cmQuantity: 5 piecesProduct Thickness: 1.6mmDue to the overlap you will get 4.75 metres per pack.EverEdge overlaps and interlocks. Please remember to add 6% to your actual requirement (that is 6cm per metre of EverEdge you use)How To Install Your Everedge Lawn Edging Step 1: Form a new edge or re-cut the existing edge deeper – effectively make a trench for the Everedge. Step 2: Place Everedge in position; moving the spikes from side to side in the soils helps to seat it well.Ensure the Everedge logo is facing the front and that the new piece being installed has the male section locking into the female. Step 3: Using a rubber mallet or hammer on a block of wood drive the Everedge into the ground until the edge is flush with the turf level. Step 4: Interlock the overlapuct Thickness: 1.6mmStep 5: When all your edging is installed press in the tongue using a screwdriver. Only push to about 45 degrees Step 6: Using either another piece of Everedge edging or a length of timber Everedge can be bent to the required angle before installing.Please see extra images for a larger version of the step-by-step images.Customer note: All the different heights of Everedge Lawn Edging are compatible. The join is always the same height from the top edge so the tops of all sizes will remain flush when put togetherPlease click here for more ideas from our Lawn Edging Department.